Description
Custom Building Products OmniGrip Premium is a flexible, lightweight, high-polymer adhesive for tile and stone installation. Designed to resist intermittent water exposure, it offers 33% less shrinkage than traditional adhesives along with excellent sag resistance. Ideal for small format ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile installations on walls, floors or countertops. Recommended for tile up to 12″ (30.5 cm) on any side, and can be used with tile up to 15″ (38.1 cm) on any side though dry time significantly increases. For tile with any side greater than 15″ (38.1 cm), CUSTOM recommends using a polymer modified cement mortar specifically for large format tile.
- High Performance: High flexibility and bond strength for lasting installations.
- Less Shrinkage: 33% less shrinkage than traditional adhesives.
- Sag & Slip Resistant: Immediately holds wall tiles in place.
- Small Format Tile: Ideal for small format tile installations.
- Wet Area Ready: Great for tub surrounds or shower walls.
SPECIFICATIONS
| Brand | Custom Building Products |
|---|---|
| Product Type | Premixed Tile Adhesive |
| Adjustability Time | > 60 minutes |
| Certification | ANSI A136.1, ANSI A108.4, TCNA EJ171 |
| Clearance | false |
| Collection Name | OmniGrip Premium |
| Color | White |
| Crack Resistance | Yes – Flexible for increased crack resistance |
| Cure Time | Minimum dry time for 8” x 8” (20.3 cm x 20.3 cm) tile is 24-72 hours before applying grout. Dry time will be extended if using larger tiles, bonding to non-porous surfaces, in high humidity, or if temperature is below 60 degrees F (15 degrees C) |
| Freeze-Thaw Resistance | Stable |
| Heat Resistance | (A136.1 Section 6.2.3.5) > 10 lb per tile: Pass |
| Impact Resistance | (A136.1 Section 6.2.3.6) Tile Remain Bonded: Pass |
| Indoor Usage | Yes |
| LEED Certification | May contribute towards LEED Certification | Complies with all Federal, SCAQMD, and CARB standards for VOC’s |
| Liter (L) | 3.78 |
| Manufacturer Color Name | White |
| Material | Proprietary blend of acrylic copolymers, calcium carbonate and inorganic materials |
| Mildew Resistant | Yes – Resistance to Mold Growth (A136.1 Section 6.4) No Growth: Pass |
| Open Time | > 60 minutes |
| Outdoor Usage | No |
| Prosol Quantity per Pack | 2.00 |
| Prosol Quantity per Skid | 100.00 |
| Radiant Heat Compatible | No |
| Shear Adhesion Strength | 7-Day Dry (A136.1 Section 6.2.3.1) > 50 psi: Pass | 28-Day Dry (A136.1 Section 6.2.3.3) > 50 psi: Pass |
| Shrinkage | 33% less shrinkage than traditional adhesives for maximum coverage and bond |
| Stain Resistance | Yes – Staining (A136.1 Section 6.3) < 70% Penetration: Pass |
| Storage Conditions | Protect from freezing & Store in a cool, dry area |
| Subfloor Type | Concrete, mortar beds, masonry, Portland cement plaster, WonderBoard Lite, cement backerboards, Exterior Grade Plywood (EGP) interior residential and light commercial, dry areas, Gypsum wallboard (interior dry areas), Existing ceramic tile, Plastic laminates, Cutback adhesive (see preparation instructions) |
| U.S. Gallon | 1 |
| Use With | Vitreous, semi-vitreous or non-vitreous tile: ceramic and impervious porcelain, mosaic, quarry tile, slate and stone |
| Warranty | 1-Year Limited Product Warranty |
| Warranty (years) | 1 |
| Weight (kg) | 4.38 |
| Weight (lb) | 9.65 |
DOCUMENTATION
*Please refer to the manufacturer website for the most updated product documentation.
