Eagle Grandeur Engineered Hickory

Eagle Grandeur Engineered Hickory accepts nail, staple or glue down installation, so one board suits a plywood subfloor or a concrete slab. Which method is right is decided by the subfloor at survey, not improvised on fitting day.

Let us assist you For the best service and an accurate stock check for your area, please contact us before ordering.

Description

Eagle Grandeur Engineered Hickory: Engineered Hardwood Installation Decided by the Subfloor

Two identical floors can be fixed down in two entirely different ways and both be correct. The board does not decide the method. What is underneath it does. Eagle Grandeur Engineered Hickory may be nailed, stapled or glued down, which is a genuine convenience, and it also means somebody has to make a choice before the first carton is opened.

Three methods, three sets of conditions

Each approach to engineered hardwood installation suits a different situation, and the differences are practical rather than theoretical.

  • Nailing drives cleats at an angle through the tongue into a wooden subfloor. It is the traditional method and it needs timber beneath it to hold the fastener.
  • Stapling works on the same principle with a different fastener. It is quick, it grips well, and it also depends on a sound wooden subfloor.
  • Gluing bonds the board to the substrate across its whole underside with the correct adhesive. It works directly over concrete and feels notably solid underfoot.

In practice, nail down flooring is the usual answer over plywood at or above grade, and glue down hardwood is the usual answer over a slab. There are rooms where either would work and the deciding factor is something else entirely: the height you have available at a doorway, the acoustic expectations of the building, or what the existing floor structure can take.

Concrete and plywood behave differently

A plywood subfloor accepts a fastener, moves a little with the seasons, and is straightforward to level where it needs it. A concrete slab accepts no fastener in normal residential work, is far less forgiving of unevenness because the adhesive bed is thin, and carries moisture in a way timber does not. That is why a slab is tested before an adhesive is specified, and why the flatness tolerance for a glued floor is tighter than people expect. Patch and level work on concrete is part of the job rather than an optional extra.

The board itself is well suited to either route. This is engineered hickory, a genuine hardwood wearing surface bonded over a multi layer core whose layers run in alternating directions, which resists cupping and seasonal movement better than a solid board of the same width and is approved above or below grade. The boards are 6 inches wide by 3/4 inch thick in random lengths of 16 to 67 inches, a box covers 20.35 square feet, the finish is handscraped and brushed, and a 35 year warranty applies.

Why the decision belongs at survey

The method changes what has to be bought, what has to be prepared and how long the work takes. Glue down hardwood needs the correct adhesive, a flat clean substrate and a matching trowel notch. Nail down flooring needs the right fastener, the right subfloor thickness and a fixing schedule. Discovering on the morning of the work that the subfloor will not take what was planned is how a project loses a week.

So the sequence is simple. Somebody looks at the subfloor, tests it where testing is required, checks heights at doorways, and then specifies the method. The materials follow that decision rather than the other way round.

Confirming the method for your rooms

Professional installation is strongly recommended for all three methods, since each has its own failure modes when rushed. Please confirm the specification, the fastening method, whether each room is suitable and the quantities you need with the Petun Flooring team before ordering.

Give the product photograph your full attention, then come and see a board under real light, since no image quite conveys how a surface reads in a room. Eagle can be collected in Kitchener and Cambridge, inventory is limited, and if you bring your measurements we can talk through subfloor options and carton counts in the same conversation.

Specifications

Grandeur Hardwood Flooring Artisan Collection

Color: EAGLE

Size: 6”×3/4″×RL (16-67 inches)

Sqft: 20.35 sf per box

Wood Species: Hickory

Finish: Handscraped & Brushed

35 year warranty

Can be installed above or below grade

Nail, staple or glue down installation

5/5 - (270 votes)