Description
Scorprio Grandeur Engineered Maple: Finishing Every Edge Properly
A floor is judged at its edges. The field looks after itself once it is down, but the eye goes straight to the top of the staircase, the line in the doorway and the gap along the baseboard. Scorprio, from the Grandeur Divine Collection, is a maple board 7-1/2 inches wide and 3/4 inch thick in random lengths, most around 7 feet, finished Handscraped and Distressed, and it deserves edges that were planned rather than improvised.
The pieces that do the work
There is a small family of profiles that finish a wood floor, and each one answers a particular situation. A stair nosing caps the front edge of a tread or the top step of a flight, giving a rounded, supported edge where the floor stops in mid air. A reducer runs down to a thinner floor in the next room so there is no small cliff to catch a toe. A T moulding bridges two floors of the same height, typically in a doorway, and gives each of them room to move independently. Quarter round or shoe moulding covers the expansion gap at the perimeter without pinning the floor down. A threshold closes the line at an exterior door or against a different surface altogether.
Taken together these hardwood transitions are what make a floor read as one considered piece of work rather than a field of boards that simply stops when it runs out of room. On a staircase in particular, the nosing is the most looked at component in the house, because it sits at eye level as you come down.
Why they are specified with the floor, not afterwards
This is the part that catches people out. Matching mouldings are produced to go with a given floor, and the supply of them is finite in the same way that the floor itself is. If the profiles are ordered weeks after the boards, you may find the floor is still available while the nosing you need is not, which leaves you choosing between waiting and accepting something that does not quite agree with the rest.
There is a measuring reason as well. Nobody can tell you how many feet of T moulding a house needs without walking it, and the count is easy to underestimate. Every doorway, every change of floor height, every stair tread and every run of baseboard is a line item. Working it out at the same time as the boards means the whole job arrives together and the installer is never held up waiting for one profile.
Walk the house before you order
- Count the doorways, and note which ones meet a floor of a different height.
- Count stair treads individually, including the top landing edge, since each one takes a stair nosing.
- Measure the perimeter of each room for shoe moulding, deducting cabinet runs.
- Note any exterior doors, which need a threshold rather than a reducer.
- Each box of boards covers 25.77 square feet; the profiles are counted separately in linear feet.
Fitting and confirmation
Nosings and stair work in particular are a job for a professional, and we recommend professional installation throughout. Scorprio is fixed nail, staple or glue down, carries a 35 year warranty and may be laid above or below grade, since the genuine maple surface sits over a multi layer core that resists seasonal movement. Hardwood transitions are counted and quoted separately from the boards. Confirm the specification, the install method, room suitability and all quantities including profiles with the Petun Flooring team.
Please look hard at the product photograph, then let us set a board and its matching mouldings side by side for you here, because that pairing is difficult to judge on a screen. Pickup is available in Kitchener and Cambridge, stock is limited, and your measurements are welcome at the counter.
Specifications
Grandeur Hardwood Flooring Divine Collection
Color: SCORPRIO
Size: 7-1/2”×3/4″×RL (most boards are 7 ft)
Sq. ft.: 25.77 sf per box
Wood Species: Maple
Finish: Handscraped & Distressed
35 year warranty
Can be installed above or below grade
Nail, staple or glue down installation

