Description
Treebark Grandeur Solid Oak: Fixed Down the Way Solid Floors Have Always Been
Most disagreements about installation are settled by the subfloor, not by preference. Before anyone chooses a method, somebody has to look carefully at what is already there. Treebark Grandeur Solid Oak may be nailed, stapled or glued down, and knowing which of those applies to your house will save a conversation later in the project.
The classic method, and why it works
Nail down hardwood is the traditional approach for solid timber. The installer drives a fastener at an angle through the tongue of each board so that the following board conceals it, leaving a face with no visible fixings anywhere. Mechanically the floor is held firmly but not rigidly, which allows the boards to do what timber does over the course of a year. Stapling works on the same principle with a different fastener, and experienced installers often hold a settled preference between the two.
What makes either of them possible is a wood subfloor. Plywood or oriented strand board takes a fastener and holds it, which is precisely what a nail or a staple needs in order to work. Most houses in this region have one on the main and upper storeys, so for a 3/4 inch solid board above grade this is usually the route an installer will take. If you are unsure what lies beneath your existing flooring, lifting a corner inside a closet normally settles the question, and a wood subfloor in sound condition is the easiest possible starting point for this product.
When adhesive is the answer instead
Over a concrete slab there is nothing for a fastener to grip, so a full spread adhesive bond is used in its place. That is the purpose of the glue down option on this product. It is a specification decision rather than a matter of taste, which is the part worth repeating: the subfloor decides the method of hardwood installation, not the homeowner and not the price list. An installer who looks at your room and recommends a change is responding to the structure, not overruling your choice.
The board being fitted
This is solid oak, 4-1/4 inches wide by 3/4 inch thick, supplied in random lengths of 1 to 5 feet with 19.55 square feet per box, a Smooth finish and a 35 year warranty. Being solid, it responds to moisture through its whole depth rather than only at the face, which is why it is rated above grade only. Below grade calls for a different product altogether, and a basement is simply not a room where solid timber belongs. We will gladly point you towards something built for that job instead. Refinishing potential depends on the construction, so ask the team instead of relying on a general figure you have read elsewhere.
Ahead of the fitting day
Professional installation matters more here than almost anywhere else, because fastener choice, spacing and expansion gaps are all decisions taken on site with the room in front of you. A nail down hardwood floor laid well will outlast the people who chose it, and one laid carelessly tends to say so within a single season. Have the subfloor checked first, then confirm the specification, the install method, which rooms are suitable and your final quantities with the Petun Flooring team.
Have a careful look at the product photograph and then come and handle a board, since the weight and feel of solid oak tells you something that an image on a listing cannot. Collection in Kitchener and Cambridge is straightforward, stock is limited, and if you arrive with your measurements we can talk through the subfloor, the hardwood installation itself and the box counts in a single visit.
Specifications
Grandeur Hardwood Flooring Contemporary Collection Solid Oak
Color: TREEBARK
Size: 4-1/4” ×3/4″×RL (1-5ft)
Sq. ft.: 19.55 per box
Wood Species: Oak
Finish: Smooth
35 years warranty
Nail, staple or glue down installation

